Stop! Before you dive in and start calculating on a math problem, reflect for a moment. How can you set up the work to minimize the number of annoying calculations?

Try the below Percent problem from the free question set that comes with your GMATPrep® software. The problem itself isn’t super hard but the calculations can become time-consuming. If you find the problem easy, don’t dismiss it. Instead, ask yourself: how can you get to the answer with an absolute minimum of annoying calculations?

* ” The table above shows the results of a recent school board election in which the candidate with the higher total number of votes from the five districts was declared the winner. Which district had the greatest number of votes for the winner?

“(A) 1

“(B) 2

“(C) 3

“(D) 4

“(E) 5”

Ugh. We have to figure out what they’re talking about in the first place!

The first sentence of the problem describes the table. It shows 5 different districts with a number of votes, a percentage of votes for one candidate and a percentage of votes for a different candidate.

Hmm. So there were two candidates, P and Q, and the one who won the election received the most votes overall. The problem doesn’t say who that was. I could calculate that from the given data, but I’m not going to do so now! I’m only going to do that if I have to.

Let’s see. The problem then asks which district had the greatest number of votes for the winner. Ugh. I am going to have to figure out whether P or Q won. Let your annoyance guide you: is there a way to tell who won without actually calculating all the votes?

Read more

A couple of months ago, we talked about what to do when a geometry problem pops up on the screen. Do you remember the basic steps? Try to implement them on the below GMATPrep® problem from the free tests.

* ”In the xy-plane, what is the y-intercept of line L?

“(1) The slope of line L is 3 times its y-intercept
“(2) The x-intercept of line L is – 1/3”

My title (3 Steps to Better Geometry) is doing double-duty. First, here’s the general 3-step process for any quant problem, geometry included:

All geometry problems also have three standard strategies that fit into that process.

First, pick up your pen and start drawing! If they give you a diagram, redraw it on your scrap paper. If they don’t (as in the above problem), draw yourself a diagram anyway. This is part of your Glance-Read-Jot step.

Second, identify the “wanted” element and mark this element on your diagram. You’ll do this as part of the Glance-Read-Jot step, but do it last so that it leads you into the Reflect-Organize stage. Where am I trying to go? How can I get there?

Third, start Working! Infer from the given information. Geometry on the GMAT can be a bit like the proofs that we learned to do in high school. You’re given a couple of pieces of info to start and you have to figure out the 4 or 5 steps that will get you over to the answer, or what you’re trying to “prove.”

Let’s dive into this problem. They’re talking about a coordinate plane, so you know the first step: draw a coordinate plane on your scrap paper. The question indicates that there’s a line L, but you don’t know anything else about it, so you can’t actually draw it. You do know, though, that they want to know the y-intercept. What does that mean?

They want to know where line L crosses the y-axis. What are the possibilities?

Infinite, really. The line could slant up or down or it could be horizontal. In any of those cases, it could cross anywhere. In fact, the line could even be vertical, in which case it would either be right on the y-axis or it wouldn’t cross the y-axis at all. Hmm.
Read more

We invite you to test your GMAT knowledge for a chance to win! The second week of every month, we will post a new Challenge Problem for you to attempt. If you submit the correct answer, you will be entered into that month’s drawing for free Manhattan GMAT prep materials. Tell your friends to get out their scrap paper and start solving!

Here is this month’s problem:

If p, q, and r are different positive integers such that p + q + r = 6, what is the value of x ?

(1) The average of x^p and x^q is x^r.

(2) The average of x^p and x^r is not x^q.

Read more

Last time, we talked about the first 2 of 4 quant strategies that everyone must master: Test Cases and Choose Smart Numbers.

Today, we’re going to cover the 3^rd and 4^th strategies. First up, we have Work Backwards. Let’s try a problem first: open up your Official Guide, 13^th edition (OG13), and try problem solving #15 on page 192. (Give yourself about 2 minutes.)

I found this one by popping open my copy of OG13 and looking for a certain characteristic that meant I knew I could use the Work Backwards technique. Can you figure out how I knew, with just a quick glance, that this problem qualified for the Work Backwards strategy? (I’ll tell you at the end of the solution.)

For copyright reasons, I can’t reproduce the entire problem, but here’s a summary: John spends 1/2 his money on fruits and vegetables, 1/3 on meat, and 1/10 on treats from the bakery. He also spends $6 on candy. By the time he’s done, he’s spent all his money. The problem asks how much money he started out with in the first place.

Here are the answer choices:

“(A) $60

“(B) $80

“(C) $90

“(D) $120

“(E) $180”

Work Backwards literally means to start with the answers and do all of the math in the reverse order described in the problem. You’re essentially plugging the answers into the problem to see which one works. This strategy is very closely tied to the first two we discussed last time—except, in this instance, you’re not picking your own numbers. Instead, you’re using the numbers given in the answers.

In general, when using this technique, start with answer (B) or (D), your choice. If one looks like an easier number, start there. If (C) looks a lot easier than (B) or (D), start with (C) instead.

This time, the numbers are all equally “hard,” so start with answer (B). Here’s what you’re going to do:

(B) $80

Set up a table to calculate each piece. If John starts with $80, then he spends $40 on fruits and vegetables. He spends… wait a second! $80 doesn’t go into 1/3 in a way that would give a dollar-and-cents amount. It would be $26.66666 repeating forever. This can’t be the right answer!

Interesting. Cross off answer (B), and glance at the other answers. They’re all divisible by 3, so we can’t cross off any others for this same reason.

Try answer (D) next.

In order for (D) to be the correct answer, the individual calculations would have to add back up to $120, but they don’t. They add up to $118.

Okay, so (D) isn’t the correct answer either. Now what? Think about what you know so far. Answer (D) didn’t work, but the calculations also fell short—$118 wasn’t large enough to reach the starting point. As a result, try a smaller starting point next.

It’s a match! The correct answer is (C).

Now, why would you want to do the problem this way, instead of the “straightforward,” normal math way? The textbook math solution on this one involves finding common denominators for three fractions—somewhat annoying but not horribly so. If you dislike manipulating fractions, or know that you’re more likely to make mistakes with that kind of math, then you may prefer to work backwards.

Note, though, that the above problem is a lower-numbered problem. On harder problems, this Work Backwards technique can become far easier than the textbook math. Try PS #203 in OG13. I would far rather Work Backwards on this problem than do the textbook math!

So, have you figured out how to tell, at a glance, that a problem might qualify for this strategy?

It has to do with the form of the answer choices. First, they need to be numeric. Second, the numbers should be what we consider “easy” numbers. These could be integers similar to the ones we saw in the above two problems. They could also be smaller “easy” fractions, such as 1/2, 1/3, 3/2, and so on.

Further, the question should ask about a single variable or unknown. If it asks for x, or for the amount of money that John had to start, then Work Backwards may be a great solution technique. If, on the other hand, the problem asks for x – y, or some other combination of unknowns, then the technique may not work as well.

(Drumroll, please) We’re now up to our fourth, and final, Quant Strategy that Everyone Must Master. Any guesses as to what it is? Try this GMATPrep© problem.

“In the figure above, the radius of the circle with center O is 1 and BC = 1. What is the area of triangular region ABC?

If the radius is 1, then the bottom line (the hypotenuse) of the triangle is 2. If you drop a line from point B to that bottom line, or base, you’ll have a height and can calculate the area of the triangle, since A = (1/2)bh.

You don’t know what that height is, yet, but you do know that it’s smaller than the length of BC. If BC were the height of the triangle, then the area would be A = (1/2)(2)(1) = 1. Because the height is smaller than BC, the area has to be smaller than 1. Eliminate answers (C), (D), and (E).

Now, decide whether you want to go through the effort of figuring out that height, so that you can calculate the precise area, or whether you’re fine with guessing between 2 answer choices. (Remember, unless you’re going for a top score on quant, you only have to answer about 60% of the questions correctly, so a 50/50 guess with about 30 seconds’ worth of work may be your best strategic move at this point on the test!)

The technique we just used to narrow down the answers is one I’m sure you’ve used before: Estimation. Everybody already knows to estimate when the problem asks you for an approximate answer. When else can (and should) you estimate?

Glance at the answers. Notice anything? They can be divided into 3 “categories” of numbers: less than 1, 1, and greater than 1.

Whenever you have a division like this (greater or less than 1, positive or negative, really big vs. really small), then you can estimate to get rid of some answers. In many cases, you can get rid of 3 and sometimes even all 4 wrong answers. Given the annoyingly complicated math that sometimes needs to take place in order to get to the final answer, your best decision just might be to narrow down to 2 answers quickly and then guess.

Want to know how to get to the actual answer for this problem, which is (B)? Take a look at the full solution here.

The 4 Quant Strategies Everyone Must Master

Here’s a summary of our four strategies.

(1) Test Cases.

–      Especially useful on Data Sufficiency with variables / unknowns. Pick numbers that fit the constraints given and test the statement. That will give you a particular answer, either a value (on Value DS) or a yes or no (on Yes/No DS). Then test another case, choosing numbers that differ from the first set in a mathematically appropriate way (e.g., positive vs. negative, odd vs. even, integer vs. fraction). If you get an “always” answer (you keep getting the same value or you get always yes or always no), then the statement is sufficient. If you find a different answer (a different value, or a yes plus a no), then that statement is not sufficient.

–      Also useful on “theory” Problem Solving questions, particularly ones that ask what must be true or could be true. Test the answers using your own real numbers and cross off any answers that don’t work with the given constraints. Keep testing, using different sets of numbers, till you have only one answer left (or you think you’ve spent too much time).

(2) Choose Smart Numbers.

–      Used on Problem Solving questions that don’t require you to find something that must or could be true. In this case, you need to select just one set of numbers to work through the math in the problem, then pick the one answer that works.

–      Look for variable expressions (no equals or inequalities signs) in the answer choices. Will also work with fraction or percent answers.

(3) Work Backwards.

–      Used on Problem Solving questions with numerical answers. Most useful when the answers are “easy”—small integers, easy fractions, and so on—and the problem asks for a single variable. Instead of selecting your own numbers to try in the problem, use the given answer choices.

–      Start with answer (B) or (D). If a choice doesn’t work, cross it off but examine the math to see whether you should try a larger or smaller choice next.

(4) Estimate.

–      You’re likely already doing this whenever the problem actually asks you to find an approximate answer, but look for more opportunities to save yourself time and mental energy. When the answers are numerical and either very far apart or split across a “divide” (e.g., greater or less than 0, greater or less than 1), you can often estimate to get rid of 2 or 3 answers, sometimes even all 4 wrong answers.

The biggest takeaway here is very simple: these strategies are just as valid as any textbook math strategies you know, and they also require just as much practice as those textbook strategies. Make these techniques a part of your practice: master how and when to use them, and you will be well on your way to mastering the Quant portion of the GMAT!

Read The 4 Math Strategies Everyone Must Master, Part 1.

We need to know a lot of different facts, rules, formulas, and techniques for the Quant portion of the test, but there are 4 math strategies that can be used over and over again, across any type of math—algebra, geometry, word problems, and so on.

Do you know what they are?

Try this GMATPrep® problem and then we’ll talk about the first of the 4 math strategies.

*If mv < pv < 0, is v > 0?

(1) m < p

(2) m < 0

All set? Read more

We invite you to test your GMAT knowledge for a chance to win! Each week, we will post a new Challenge Problem for you to attempt. If you submit the correct answer, you will be entered into that week’s drawing for a free Manhattan GMAT Prep item. Tell your friends to get out their scrap paper and start solving!

Here is this week’s problem:

A pharmacy must purchase a set of n metal weights, each weighing an integer number of grams, such that all integer weights from 1 to 300 grams (inclusive) can be made with a combination of one or more of the weights. What is the minimum number of metal weights that the pharmacy must purchase?

Read more

What do you do when you realize a geometry problem has just popped up on the screen? Try this GMATPrep© problem from the free practice test and then we’ll talk about what to do!

In the figure above, the radius of the circle with center O is 1 and BC = 1. What is the area of triangular region ABC?

What’s your first step? Let’s use this problem as an opportunity to practice the Quant Process.

At a glance, you can see that the problem provides a diagram. Draw! Make it big enough that you can add labels as you calculate new pieces of information (and, of course, jot down any information given in the problem).

Finally, write down any formulas you’ll need, as well as whatever the problem asks you to find. Your scrap paper might look something like this:
Read more

We invite you to test your GMAT knowledge for a chance to win! Each week, we will post a new Challenge Problem for you to attempt. If you submit the correct answer, you will be entered into that week’s drawing for a free Manhattan GMAT Prep item. Tell your friends to get out their scrap paper and start solving!

Here is this week’s problem:

A set of n identical triangles with angle x° and two sides of length 1 is assembled to make a parallelogram (if n is even) or a trapezoid (if n is odd), as shown. Is the perimeter of the parallelogram or trapezoid less than 10?

Read more

We invite you to test your GMAT knowledge for a chance to win! Each week, we will post a new Challenge Problem for you to attempt. If you submit the correct answer, you will be entered into that week’s drawing for a free Manhattan GMAT Prep item. Tell your friends to get out their scrap paper and start solving!

Here is this week’s problem:

Can you find the most efficient way to solve this problem?

Gita, Hussain, Inge, Jeong, Karen, and Leila are seated in a row of six chairs. How many seating arrangements are possible if Gita cannot sit next to Inge and Jeong must sit next to Leila?

Read more

We invite you to test your GMAT knowledge for a chance to win! Each week, we will post a new Challenge Problem for you to attempt. If you submit the correct answer, you will be entered into that week’s drawing for a free Manhattan GMAT Prep item. Tell your friends to get out their scrap paper and start solving!

Here is this week’s problem:

An isosceles triangle with one angle of 120° is inscribed in a circle of radius 2. This triangle is rotated 90° about the center of the circle. What is the total area covered by the triangle throughout this movement, from starting point to final resting point?

(A) 
(B) 
(C) 
(D) 
(E) 

Read more